Results 1 to 3 of 3

Thread: LS376/525 SWAP INTO 2006 CTSV help

  1. #1
    Tuner in Training LILFREDDIE's Avatar
    Join Date
    Nov 2008
    Location
    HOUMA, LA
    Posts
    27

    LS376/525 SWAP INTO 2006 CTSV help

    I was wondering if anyone had a file from the GM Performance LS376/525 Controller Kit I looked in the tune repository but it lists everything for year make model.

  2. #2
    Tuner Trucker82's Avatar
    Join Date
    Aug 2017
    Location
    Bangor, WI
    Posts
    105

    Swap File

    Quote Originally Posted by LILFREDDIE View Post
    I was wondering if anyone had a file from the GM Performance LS376/525 Controller Kit I looked in the tune repository but it lists everything for year make model.
    Did you ever have any luck getting a file? If not I was wondering if you could held me out a little. What is the base running airflow number you came up with for 70-80 degrees? I could use it as a start point that I would be seriously greatful for the help.

    Thank you.

  3. #3
    Advanced Tuner Jabbott's Avatar
    Join Date
    Oct 2006
    Location
    Richmond
    Posts
    223
    I have a 2006 CTSV file that was my 6.0L with the ASA cam in it. It will be a little different but just start with your stock cal. Add 20% to the MAF and remove 10% from The VE table to start with. Run your idle air around 16 to start with and install wb and go from there.
    Too many unfinished projects