Hey everyone. i've got a 2009 Challenger SRT8 on the dyno right now with a Vortech V-3. Customer pullied down and added headers. Our tune is based off the OTS Vortech tune. I haven't touched throttle settings. I have only added fuel and removed timing to dial in the VE table. After a WOT pull, I let off the throttle at about 5k and the revs continue to rise until I shut it down with the key. Throttle volts read ~1.51 and pedal volts are 0. I'm on the dyno right now. Heres a log and the tune. If you guys can help me out ASAP, I'd appeciate it. Thanks!
2009VortechChallenger1.hpt
challenger1.hpl