With the older software version I was never able to get the user defined formulas to track and match the FAST AFR meter correctly. So I upgraded HPTuners and also upgraded my MPVI interface to the Pro version. My hopes of finally hooking up my FAST wideband meter to the interface and easily reading my AFR next to the other data has become a disappointment. I see a slew of other manufacturers that have pre-defined sensors and yet nothing for FAST. I just don't understand why they are not included as they seem to be the only one missing (I recall the previous version of HPtuners had FAST included in the listing of sensors). I have searched the forum and found some instructions but they all seem to demonstrate setting up with pre-defined sensors. I continued to look and can not find anything that can help me set my meter up and would appreciate any help I can get.
I've included the owner/instructions for the FAST unit if that would be of assistance.