Results 1 to 7 of 7

Thread: 05 6.0L PSD and PATS

  1. #1
    Tuner in Training
    Join Date
    Dec 2015
    Posts
    38

    05 6.0L PSD and PATS

    Is there any way to disable PATS on a 05 PSD. I have a friend who has been fighting a starting issue, everything has been replaced (hpop, branch tubes, dummy plugs, ecm, etc). I wanted to try flashing in a test file to see if it helps him out.

    Thanks

    Sam

  2. #2
    Advanced Tuner RandomEnthusiast's Avatar
    Join Date
    Feb 2016
    Location
    Texas
    Posts
    333
    It's not supported as of yet.

  3. #3
    Tuner in Training
    Join Date
    Jun 2014
    Posts
    13
    As far as I know those trucks does not have PATS, or at least I've swapped ecms ant they start right up, tell us more about the problem, maybe I can help you.

  4. #4
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    I'm 99% positive these trucks do not have PATS.
    Eric Brooks
    HP Tuners, LLC

  5. #5
    Only the excursions have it the trucks do not

  6. #6
    you have air in the HP oil system and maybe in the fuel.

  7. #7
    monitor your icp when cranking, 500psi minimum for the ficm to start firing the injectors, if you have that you can actually hear a change when cranking if the ficm is actually firing the injectors even if there isnt fuel. does it smoke at all when cranking? How long are your crank times?