with flex sensor gas and alcohol pe tables must match
with flex sensor gas and alcohol pe tables must match
Never seen any that did. Up to you and what you find to work best for your setup. A lot of people out there won't even populate the PE tables. I actually find in some instances - mainly NA setups - because of all the extra fuel that you are better off to pull a touch of timing for alcohol whereas you normally add timing for gas. You can also pull fuel, but torque always seems to suffer doing that.
2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80
~Greg Huggins~
Remote Tuning Available at gh[email protected]
Mobile Tuning Available for North Georgia and WNC