Throttle Position

[R8SVton]

Hi guys,
Did a log with version 3.2.146 and found the THROTTLE POSITION to be reading 39%.

Cheers

Screenshot (5).png

[R8SVton]

Must be normal if no replies

[5FDP]

Remove the channel and re add it, then see what happens.

On GEN 4 computers, full throttle should be 87-88% and not stay stuck at 39%.

[R8SVton]

Thanx for your reply,
before I updated the software, full throttle was 87-88% and when updated it reads 39% full throttle.

[Mr. Smith]

Must be normal if no replies

I wanted to help, but didn't see your question or point. You just wrote your TPS was reading 39%. Like - and? Your speedo is also reading 113km/h, MAP 98kPa... in the pic. It looked like you just accelerated and held the throttle open at 39%.

So the problem is your TPS maxes out at 39%, right?
Try a different TPS gauge.
If all of them don't work right, make a custom one in Math Parameters.
And try what 5FDP wrote.

[R8SVton]

Hi 5FDP,
I removed channel and re add it as you suggested, the news is it went from 39% full throttle reading to 61% full throttle reading. So its improved a little.

Remove the channel and re add it, then see what happens.

On GEN 4 computers, full throttle should be 87-88% and not stay stuck at 39%.