Results 1 to 5 of 5

Thread: Launch Assitance + Gear Shift Hang for Manual Trans.

  1. #1
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409

    Launch Assitance + Gear Shift Hang for Manual Trans.

    Several people with 2015+ Mustangs have asked about the hanging RPM that happens during a shift, as well as the launch assistance. I've just added the parameters for this and they will be available in tomorrow's build of VCM Suite 3.4.

    I have add this to Focus ST, Focus RS, 15+ Mustang GT and Ecoboost

    Gear Shift Hang allows the PCM to sort of hang the throttle open some (slow decay) to make normal shifting easier. Some people hate this.

    Also, the Launch Assistance requests additional torque from the engine when you pull off from a stop.

    GSH_LAUNCHASSIST.JPG
    Last edited by Eric@HPTuners; 12-14-2016 at 04:36 PM.
    Eric Brooks
    HP Tuners, LLC

  2. #2
    Tuner in Training
    Join Date
    Aug 2016
    Location
    Blackpool, UK
    Posts
    46
    Thanks Eric.

  3. #3
    Tuner in Training
    Join Date
    Aug 2014
    Posts
    10
    how do you turn off clutch protection on an ST focus?
    Last edited by Sofakingfast; 01-15-2019 at 06:31 PM.

  4. #4
    Potential Tuner
    Join Date
    Mar 2012
    Posts
    1
    Hello Eric,

    i updated my VCM-Editor to the last Version but there is no "Gear-Shift Hanging".

    Is it possible you do that also for the 2015 3,7 V6 Mustang ? Or is there another option for the V6 ?


    Thanks, Andreas

  5. #5
    Tuner in Training
    Join Date
    Feb 2019
    Posts
    26
    +1 for V6 support if possible please.