Results 1 to 4 of 4

Thread: Help With LC1 and HP Tuners And XD 16 Gauge

  1. 05-29-2006 #1
    TwinTurboZo6
    TwinTurboZo6 is offline
    Potential Tuner
    Join Date
    May 2006
    Posts
    2

    Help With LC1 and HP Tuners And XD 16 Gauge

    Hi everyone I have a LM1 that I gotta get rid of and im planning on putting in the LC1 but I want that perminatly hooked up to the XD 16 gauge while at the same time permently hooked up to my laptop through the VCM Scanner. Any info would be great thanks guys.
    Reply With Quote Reply With Quote
  2. 05-29-2006 #2
    WicketMike
    WicketMike is offline
    Tuner in Training
    Join Date
    May 2006
    Posts
    45
    i bought the lc-1 with the inovate gauge and in the instructions it shows you how to set it up. One of the outputs goes to the gauge and then another to the scanner along with a ground
    Reply With Quote Reply With Quote
  3. 05-29-2006 #3
    TwinTurboZo6
    TwinTurboZo6 is offline
    Potential Tuner
    Join Date
    May 2006
    Posts
    2
    I have it hooked up to the gauge but not hp tuners I dont understand it.
    Reply With Quote Reply With Quote
  4. 05-29-2006 #4
    WicketMike
    WicketMike is offline
    Tuner in Training
    Join Date
    May 2006
    Posts
    45
    do you have the 2nd output and a ground coming from the lc1?

    you plug the ground into #5 on the hptuners and the output into the #1 on the hptuners.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »