Injector data needed. Bosch 0280 158 333 (1550cc@3bar)

[super6ute]

2006 SRT8 Jeep with NGC3 CAN Controller.
Just changed from Bosch 2000cc due to E85 issues. I had the cal for those fairly spot on.
Does anyone know who can characterise them for use the this controller?
May just have to bite the bullet and purchase the ID1700's I guess.

[mstang_man]

1650cc.JPG


hopefully this will help I read the injpw works around 1.5-1.6ms

[super6ute]

Thanks mstang. Those dwell times go along with what I have.
The main issue is I need to know exact flow rates at x opening periods.

[mstang_man]

http://injectordynamics.com/wp-conte...-6-23-2015.xls

[mstang_man]

http://injectordynamics.com/wp-conte...-6-23-2015.xls

[06300CSRT8]

YOu will not find Chrysler style data from Injector dynamics, they don't publish flow vs pulsewidth. All those links have is flow vs manifold pressure.