LS3 rev limiter

[steve-0]

HI guys
i have an ls3 camaro , i wanna make it riving faster i try to set "Cutoff RPM Hyst" less but nothing change . im guess i need to make change
in "Cmd Torque Delta" table but any one know what to do increase or decrease the table ?

my sating is

Control Method:
Spark = Enabled
Fuel Cut = Enabled
ETC = Disabled

regards

[steve-0]

NO one hear know Haw to tuning riv limit ?? wow

[kuw8y]

Disable Spark.. fuel cut.. etc
Set switchover delay to 20

[steve-0]

Disable Spark.. fuel cut.. etc
Set switchover delay to 20

nothing change i will try to use Cmd Torque table

[andrewzpsu]

Engine > Fuel > Cutoff, DFCO > Cutoff RPM vs. Gear - Normal

[kuw8y]

nothing change i will try to use Cmd Torque table

Post you file

[steve-0]

Post you file

i want it to riv faster just like drift cars or ls1

[StopGap]

i want it to riv faster just like drift cars or ls1

If drifting is what you're trying to do, your torque management settings are preventing wheel spin. You have both spark and ETC controlling wheel spin.
torque management > general > Traction Control System > TCS method > disable both spark and ETC.

you already have powerhop disabled.

I wouldn't change rev limiter, especially if you're drifting. You still want over rev protection. Also, by disabling spark and etc you will no longer have any TC.

If you're still losing rpm in a low speed drift
Fuel > DFCO > RPM limits > wheel spin limits - change all to 7000 rpm.

[super-ss]

Make the Cmd Torque table like this: cmdTD.png

[steve-0]

Make the Cmd Torque table like this: cmdTD.png

lot of thanks

[super-ss]

You must welcome. Please update me is't good or not?