How to dyno a 10 SRT8 w/ AWD

[Jay@HAP]

Is there a way to put one of these in 2wd to run on the dyno? I don't any experience with them and quoting a job at the moment.

Thanks for any input.

Jason

[06300CSRT8]

Remove transfer case motor and harness connecting it, under driver side, grey round looking thing with 4 10mm bolts. This is the easiest way, quick job.

[weaponized]

If it is any thing like my 2012 awd charger, you can disable AWD in HP tuners. Under "system" tab and then "general" tab select "disable" in the AWD field

[curt@injected]

first gens you have to pull the t case motor like 06300CSRT8 said. Second gens can be disabled with the scanner

[Jay@HAP]

Thanks guys. I appreciate it

[aboturky]

guys i have a 2005 dodge durango that have AWD 4LOCK 4LOW and i want the car to be 2 wheel drive so it do burnout how ? in hptuner AWD option is disable factory

[06300CSRT8]

For that 2005 Durango your only choice is I believe is mechanical, not via the tune. But I am not an expert in the Durango.

[flyingfool]

the quick and dirty way that we've done it, which is dangerous but , you block up the front end so the front wheels are free to spin, then get a flunky to hand spin the front tires while doing a dyno pull. this works on 2000-2006 and up mercedes benz and chryslers

[Hemituna]

LOL @ 'flunky'