Frame Rewind, Forward, Slider Bar, Goto Frame in Scanner

[WopOnTour]

Any way to add better control for viewing logs in the scanner?
Just some basic navigational additions such as:
Frame Reverse/Rewind, Frame Forward, Frame Select Slider Bar, and/or Goto Frame???
It's extremely difficult to get to the exact spot in a log that you are observing.
Thne of you go past your desired frame- your only choice is to STOP and START all over.
JMO
WopOnTour

[Bill@HPTuners]

you can use the slider bar in the graph to go to any frame. Also by using the marker function you can mark individual frames for problems & then view them at a later time in the scanner.

[WopOnTour]

you can use the slider bar in the graph to go to any frame. Also by using the marker function you can mark individual frames for problems & then view them at a later time in the scanner.

The slider bar in chart view is OK but the graph cursor line is too limiting IMO(visible frame range only). If it would automatically scroll forward and backwards when you reach the end of the visible frame range it wouldnt be too bad I guess. But I sure wish it wasnt automatically bound to the mouse so that you could more easily move to your histogram or table view without it moving away from your current frame.(Otherwise your trying to move your mouse directly up or down trying not to change your current frame #)
You should have to click and hold to move that curser line on the graph IMO.
Wop

[PurplePiss]

It would be cool if when you clicked on the knock retard cells that it took you to the frame where it happened or told you the frame #.

[Wilde Racing]

It would be cool if when you clicked on the knock retard cells that it took you to the frame where it happened or told you the frame #.

This would be WAY cool. or if we could save different chart display setting like we can with the histogram.

[Bill@HPTuners]

chart displays are saved in the configs if im not mistaken so saving them is possible.