GM 12613412 Injector Pressure Data - E38 to E67 Transformation

[griffincox]

I have a TVS1900 that came with 12613412 out of the box. These are 50lb/hr @58 psi, E85 injectors used on the L96 6.0L from 2010-2013 (and beyond?).

The E38 is the only controller i know of that came with the injectors. The E67 has the same number of datum at a slightly different scale.

I used interpolate and plotted the results. There is a small inflection at around 320 kPa on the E38 data, but otherwise this looks good to me.

Would anyone do anything different here to get correct data?