Results 1 to 1 of 1

Thread: Data Log Saving

  1. 03-03-2017 #1
    366LS6v
    366LS6v is offline
    Tuner in Training
    Join Date
    Jan 2017
    Location
    Spring Valley, WI
    Posts
    17

    Data Log Saving

    Hey all, I'm getting the hang of this but have been experiencing a problem viewing Data Logs, VCM Editor vs 3.4.48

    I can see all cells while driving, but after I save it and view for adjustments the values aren't shown in the cells, while the Log is playing, the values appear on a cell to cell basis LTFT and STFT, but Spark Retard and Spark Advance appears in all cells at all times? help me solve this, I always stop and save prior to shutting engine off..could it be the USB port/cable being bad?

    EDIT: added LOG sorry
    Attached Files Attached Files
    Last edited by 366LS6v; 03-03-2017 at 06:07 PM.
    2005 Cts-V 366 LS2 forged rotating assembly stock stroke, LPE TRG-002, JE Flat Top 4.009 pistons, Tick SNS Stage 3 Cam, LS7 lifters, BTR 7.450 Hardened Pushrods, BTR Dual .660 springs, Harland Sharp 1.7 Rollers, Katech oil pump, C5-R chain, Mantic Single Clutch w/Tick remote bleeder, Hurst short throw, 8.8 Torsen 4:10's, 31 spline DSS, K&N intake, mid rise sheetmetal 90mm TB, 1 7/8 OBX Long Tubes no cats, AEM Wideband, ATI Balancer, 160* Tstat, lowered on BC Coilovers, HP Tuners Pro
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »