What hardware (ECM and TCM) are used in the 17's? When I connect I get a drop down menu with a bunch of different ones. I have tried selecting most of the Ford ones but no luck so far.
Thanks
What hardware (ECM and TCM) are used in the 17's? When I connect I get a drop down menu with a bunch of different ones. I have tried selecting most of the Ford ones but no luck so far.
Thanks
TC-277. Make sure you are using the latest beta.Originally Posted by Bhebert3
Eric Brooks
HP Tuners, LLC
Delete.
Last edited by Chally; 05-07-2017 at 11:01 PM.
anyone wanted to share a good 2017 raptor tune?
Stock Tune for a Raptor Runs unbelievably well.
If your looking for someone to give you a tune that you can just plug and play there are tuners selling them now.
If you are looking to tune it your self start a thread and post a read of yours and a log and some of the fine people on this forum will help you toward your goal.
Can you post one with the trans tune please.
looking for same thing here
Is the 15 Second flashing with the VCM pro or Hptuners Ngauge?With VCM Suite 3.5 Beta, HP Tuners is now proud to offer tuning and data logging support for 2017+ Ford F-150 3.5L Ecoboost and Raptor.
This release makes VCM Suite the FIRST software to offer full tuning support.
The 2017+ F-150 3.5L Ecoboost and Raptor now have both Port and Direct Injection, and with this use a brand new ECM. Our flashing takes 18 seconds!
NOTE: Individual vehicle licensing for the 2017+ Ford F-150 3.5L Ecoboost and Raptor is 4 credits. 10-Speed TCM support is not covered in this release.
this one did not work for me, i set auto shutoff to disable and max time to 1,000,000, it still shutoff at stops but now it odes not start automatically, i have to start with the button again. any idea?
thanks.
Idle Auto Shutoff IS NOT the same thing is Auto Start Stop. On almost all new Fords that sit and idle for 30 minutes, the ECU will kill the engine. That is Idle Auto Shutoff.
Auto Start Stop is in the System tab, and there is a switch to enable or disable it.
Eric Brooks
HP Tuners, LLC
that will help so much, i didn't noticed that switch, I'll try it ASAP. thanks.
When disabling auto start/stop on my '17 f150 eb, it will throw a dash error message for steering system fault. Any ideas?
Does it go away when you re-enable it? Email support with your file, so we can double check the mapping.
Eric Brooks
HP Tuners, LLC
HPTuners - can you clarify the number of credits to tune the Gen 2 3.5 in the 17's? This sticky says 4 and I don't see any notice of that changing, but I am hearing conflicting information.
4 credits for the ECM.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
It is not recommended for you to load any other file from another vehicle. I believe turbo size manifolds and other stuff change on a raptor than a regular ecoboost
Credit fee for this have been lowered to 2 credits for ECM, 2 for TCM. Use latest beta.
Eric Brooks
HP Tuners, LLC
Any ETA on support for 2018s?
Here is a stock 2017 Raptor ECM and TCM tune.
Stock.hpt
sorry I am new to this forum and HP tuners and ngauge lol. I see the stock raptor .hpt file but do you have the stock nguage format .stk file?? I had a problem today and got stuck for a little while and my stock file on my ngauge said "wrong vehicle file" I have the latest ngauge firmware and read and saved the stock TCM and ECM files. it saved as stockfile.stk in the stock folder on the SD card. Its strange cause I have no problems loading the "91 daily tune" files from 5star.
couple of questions.... are all the 2017 and 2018 all models (801 and 802a) of raptors have the same stock tune from factory?
are hpt files compatible with the stk files on the ngauge? if not how do you convert them to ngauge files?
any one have a stock file that works with ngauge??
any one have the stock ford performance tune that I hear has been in the works?
thank you
Reply With Quote