Results 1 to 4 of 4

Thread: Issue when reading 2016 Colorado Diesel

  1. 03-18-2017 #1
    Rhino
    Rhino is offline
    Tuner Rhino's Avatar
    Join Date
    Aug 2007
    Location
    Olathe, KS
    Posts
    57

    Issue when reading 2016 Colorado Diesel

    I'm trying to read the tune out of my baby Duramax, however I've been unsuccessful so far.

    Using VCM Editor 3.4.84 on Windows 10.

    I'll plug the interface in while the truck's off, and turn the key forward to acc. The fuel pump appears to run for a longer period of time than with the interface not plugged in. The menu option for read remains grayed out. The interface will flash "busy" every few seconds.
    To verify the interface and PC are functional I successfully read my '02 Camaro without issue.

    Are there any steps I'm missing to read my Colorado? Any help would be greatly appreciated.
    Last edited by Rhino; 03-18-2017 at 02:56 PM.
    Reply With Quote Reply With Quote
  2. 03-18-2017 #2
    GHuggins
    GHuggins is offline
    Tuning Addict
    Join Date
    Jan 2015
    Location
    Franklin, NC / Gainesville, Ga
    Posts
    6,802
    You may need beta - I used beta when I read mine... Stock attached...
    Attached Files Attached Files
    2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
    2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80

    ~Greg Huggins~
    Remote Tuning Available at gh[email protected]
    Mobile Tuning Available for North Georgia and WNC
    Reply With Quote Reply With Quote
  3. 03-18-2017 #3
    Rhino
    Rhino is offline
    Tuner Rhino's Avatar
    Join Date
    Aug 2007
    Location
    Olathe, KS
    Posts
    57
    Ahh, good point. I hadn't considered that. I saw it listed on the "supported" list, but it might be that it isn't yet rolled into the full release. I shot off an email to support for verification.

    Thanks.
    Reply With Quote Reply With Quote
  4. 03-19-2017 #4
    Engineer@HPT
    Engineer@HPT is offline
    HPT Employee Engineer@HPT's Avatar
    Join Date
    Jan 2015
    Location
    fecadefa
    Posts
    615
    This application is supported in 3.4 stable. Please email your debug.dat file to support. You probably have a different issue if your tune is stock.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »