Results 1 to 4 of 4

Thread: New case learn procedure?

  1. #1
    Tuner in Training SlowButFast's Avatar
    Join Date
    Nov 2010
    Posts
    10

    New case learn procedure?

    I haven't done a case learn in a few years, but my VCM Scanner just has a ON button for the case learn function. No longer BEGIN.
    How are we suppose to do the procedure now?
    3500 Swapped Pontiac Grand Am GT
    Simply Modded But Dont Call Her Stock

  2. #2
    I have the same question. I hit the on button and nothing happens.
    2017 Buick Regal Sport Touring 2.0t

  3. #3
    Advanced Tuner
    Join Date
    Nov 2015
    Location
    In a sandpit
    Posts
    444
    This was the process I used (and worked);

    using 3.0
    Ill try to clear this up for those having trouble...
    set park brake,
    push and hold brake until you are completely done,start vehicle,
    click ( crank learn) fairly quickly accelerate till you hit the cut off, let off throttle once it has come to an idle IF successful your mil will go off,
    click the OK button that told you to accell to cutoff,
    turn off ignition for atleast 15 second. restart and the mil should stay off
    you can now release the brake.. ( i also had to go into the diagnostic menu and clear the code from there on VCM Scanner but after that it should be fully reset.)
    99 TA, Texas Speed LS376, PRC heads, 233/239 cam, Fast 92mm, 95mm TB, card style MAF, Tick TR6060, Strange 4.11 12 bolt axle & clutchpack diff, Strano springs/dampers, Vette 18" wheels, Vette disks, CTS-V calipers, 16lb flywheel, long tube headers, no cats.

  4. #4
    I have the newest version and nothing comes up to accel. No instructions or confirmation what so ever. They definitely need to improve this process. Thanks for the help
    2017 Buick Regal Sport Touring 2.0t