Page 5 of 5 FirstFirst 12345
Results 81 to 86 of 86

Thread: 2013+ ZF8 8-Speed Now Supported - VCM Suite 3.5 Beta

  1. #81
    Senior Tuner
    Join Date
    Jan 2022
    Location
    fountain valley
    Posts
    1,442

    Zf70

    Oops
    Attached Images Attached Images
    Last edited by LilSick; 01-14-2023 at 12:27 PM.

  2. #82
    Senior Tuner
    Join Date
    Jan 2022
    Location
    fountain valley
    Posts
    1,442
    Thanks!
    Last edited by LilSick; 01-14-2023 at 12:28 PM.

  3. #83
    Senior Tuner
    Join Date
    Jan 2022
    Location
    fountain valley
    Posts
    1,442
    Yeah I figured it out but thank you just the same. You ever see a car use any of those manual patterns other than 28 or 47???
    Last edited by LilSick; 01-06-2023 at 03:17 PM.

  4. #84
    Tuner in Training
    Join Date
    Feb 2021
    Location
    Dallas Texas
    Posts
    35
    those 5 are for downshifting in manual mode and the same 5 tables located in non aggressive shift maps are the upshift side. notice how far apart the oos rpms are. in manual mode coast to a stop without downshifting, that's when those tables are used. same for the upshift side. use the paddles and hit the limiter it will shift for you in relation to what those oos rpms are set to and your max rpm tables. Trust me i mess around with those tables all the time. or just try it yourself. hint: If i want to disable MDS on the trans side i will put a regular shift pattern like shift pattern 5 in pattern 28 on both tables which is m-gate manual mode with the shifter and it will deactivate MDS in that mode . downside is you will lose the ability to control the shift because it adopts pattern 5's shift properties.

  5. #85
    Potential Tuner
    Join Date
    Oct 2024
    Posts
    1
    Hello, I have a 2013 Charger SXT with the 845RE and that awful monostable shifter. Ive heard that in order to try an upgrade to either the rotary or 15+ shifter the BCM needs to be tuned. Is that something HPT does?

  6. #86
    Senior Tuner
    Join Date
    Jan 2022
    Location
    fountain valley
    Posts
    1,442
    hpt does not give access to the bcm

    you need alpha obd or the likes to change the config there