So this is the first time doing this since hpt gave us the option to do it our self, and of course the truck would be off site and doing it as a favor for my guy who does my ceramic coating. So I read the tune, in 2.24 and then updated to the latest and greatest 3.4.85 and found a matching os 80e file and did the segment swap. Go load the tune and of course truck is on jackstands not ready to run "waiting on parts" so I cant verify if it worked right. So the next day he text and says it acts like it dropped the pressure and wont move itself. So I go back, re write entire this time and nothing. So I came home and compared the files and found several of the DTC's for trans stuff was different, I've now updated those to match. So long story short can somebody more competent with these segment swaps please verify I have it all right now before I treck back over shooting in the dark tomorrow??? I've attached all three files, the original (dannyross80eswap) and then completed file I will load again tomorrow with the changes to DTC's (dannyross80esegswap) and the file I pulled the seg swap from with matching OS (1465433695)