I have a pro Interface, I bought the upgrade specifically so I could have the external channels logging, and so I could Log without laptop attached.
Car is an 06 CTS-V LS2 E67. I can not for the life of me get the standalone logging to work.
I've gone through all of this (from the howto) multiple times, with multiple different parameters logged, I've tried everything i can think of, including ONLY logging RPM.
"To setup the standalone datalogging feature for the first time on a new vehicle or when switching from another vehicle follow the steps below or watch our Standalone Datalogging Demo:
Key your vehicle into the run position.
Connect your interface to your vehicle's obd2 port and to your laptop's usb port.
Open VCM Suite Scanner and open your Table(Primary) Display.
Click the connect icon.
Add or delete any PID's you want.
Save your config for later use(optional).
Click Scan-MPVI Pro Data Logging.
Click Write Config-Yes.
Unplug the USB connector from your laptop.
Start vehicle if not already running.
Press and Hold the Record button for ~2 seconds to start recording.
Press and Hold the Stop button for ~2 seconds when your finished to stop recording."
Every single time i press and hold the record button, it'll start flashing red. and not log a thing.
has anyone else had these issues? how can i get them solved (especially without having to be without my interface for an indeterminate amount of time)