Page 2 of 2 FirstFirst 12
Results 21 to 22 of 22

Thread: Not hitting 100% throttle right away

  1. #21
    Tuner in Training
    Join Date
    Mar 2018
    Location
    Brandon, FL
    Posts
    14
    Quote Originally Posted by BackyardTurbo_FTW View Post
    Thats what I mentioned to Quaalude above, yes that partially controls the throttle limitation.
    Did more testing today and I tried maxing out Table 11283-Desired Throttle table with 100.0 @ 4597.3 y-axis and lower Table 11338 - Throttle for 95% Charge by 5% across the board and still can't get 100% Commanded Throttle. Commanded Throttle still follows the RPM trend. See log 18-12-08 18-20-33_1st to 3rd gear.
    Attached Images Attached Images
    Attached Files Attached Files

  2. #22
    Tuner in Training
    Join Date
    Mar 2018
    Location
    Brandon, FL
    Posts
    14
    Ok, did some more testing yesterday. I was able to get commanded throttle to plateau at 100% for .7s (see attached log). This is a lot better curve than the peaky curve in the previous log. I adjusted Table 11338 - Throttle for 95% Charge which helped level out the curve so I'm getting there.
    Attached Images Attached Images
    Attached Files Attached Files

    11.962 @ 117.14mph-AFE dry air filters, ROW boxes, & stock tune - 2/25/16
    12.214 @ 115.22mph-AFE dry air filters, ROW boxes, & EC V5 dyno tune - 4/21/16
    12.057 @ 115.97mph-AFE dry air filters, ROW boxes, & EC V6 tune - 2/3/17
    12.067 @ 116.30mph-AFE dry air filters, ROW boxes, MBH headers, midpipes, X-pipe, & EC V7 header tune - 3/25/18
    11.844 @ 119.14mph-AFE dry air filters, ROW boxes, MBH headers, Quaalude midpipes w/Mag. cats & Vibrant mufflers, X-pipe, & Quaalude HP Tuner tune - 12/6/18