Results 1 to 2 of 2

Thread: 2005 GTP swap in 1983 RX7

  1. #1
    Potential Tuner
    Join Date
    Apr 2017
    Posts
    1

    2005 GTP swap in 1983 RX7

    Hello all,

    Hopefully I don't get bashed to hard, but I need some info.

    I'm currently swapping out my old rotors for the L32 out of my 2005 GTP.
    I have a T5 with a metric bolt pattern. I don't plan using abs, air conditioning, or power steering. I'm fabricating in the GTP dash into the 7 and going to use the GTP's wire harness.

    My question is with hptuners can I mod the pcm to run without the BCM, Abs, power steering, and air conditioning system? I should have the swap done by mid August so any information will be helpful. Thank you much.

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    The 3800 doesn't even need any of that stuff to run. The 3800 computer is very simple, you should be able to switch off the VATS system, remove any TM settings that deal with traction control/abuse mode because you aren't running the factory 4T65e HD.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.