Hi i?m trying to figure out how to turne the VATS off in a GEN 4 2010 LS3 camaro stock file , it was swapped to a e46 BMw drift car and it doesn?t starte, no spark
i haven?t done this in a GEN 4 file, looks diffirent
can somebody help me figure out what i need to do here
thanks
Baering
you need to disable the vats and then reflash the ecm entire to disable the vats and the then it will start.
Vats on the E38/E67 is disabled through the OS window. Attached is a view of the window as well as the changes you need to make to it. Then you must do a write entire to set the Vats to disabled.
Ed M
2004 Vette Coupe, LS2, MN6, Vararam, ARH/CATs, Ti's, 4:10, Trickflow 215, 30# SVO, Vette Doctors Cam, Fast 90/90, DD McLeod, DTE Brace, Hurst shifter, Bilsteins etc. 480/430
ERM Performance Tuning -- Interactive Learning ..from tuning software training to custom tunes
HP Tuners Dealer- VCM Suite (free 2hr training session with purchase), credits and new Version 2.0 turtorial available
http://www.ermperformancetuning.com
http://www.facebook.com/ERMPerformanceTuning
[email protected]
Make sure you aren't in Basic View or the VATS patches won't be visible in the OS tab.
Does it crank ??? You may have another issue to think about .
I thought if the VATS the problem it will crank and start for a few seconds and then will shut off.
Reply With Quote