Ram 2013 swap 6.4 issue

[SebastSRT]

hi am having problem with the swap . Ram tuck 2013 6 speed with a 6.4 hemi . I am having problem raising the shift limiiter i want to shift 6200rpm like a 6.4.

ALso having SRV mil code evenif i turn off the mil on the hp tuners problem

I want to disable all the torque reduction

ALso i want to fine tune the part throttle i disable the neural network but when i log my STFT* LTFT when i do the correction in my ve table it seem that it does do nothing ..


Also having bank 1 lean code


if anyybody can help me thank you

this is my tune tune oem truck ram 6.4 rev3.hpt

[Abdulaziz_pe]

are you running stock 5.7 injectors & intake ?

if so, put it back to stock and crank it. if your o2 sensors are hooked up correctly it will run like a butter