Looking for help kinda. I'm new to ford tuning and some of these tables don't make alot of sense. It dose not help that I'm timid as this is my daily and I'm just trying to see what she can do on a moderate tune.
I have been working with the torque management tables of a 2007 ford crown Victoria police interceptor. During my logs I never see more then 80% throttle opening and the torque reading is "driver demand"
There is a table in airflow under electronic throttle called "driver demand" with 2 options "wheel torque and engine torque" the graphs are rpm over pedal position the pedal position ranged from 12-600 but dose not say what measurement or value those numbers are. The graph uses lb-ft I'm assuming are estimated torque values the engine "can" make. The highest number in the graph is 401.23 at 5000rpmx600. So since this is under "driver demand" dose this mean I can Max the table and when I hit wot it's going to finally open the throttle 100% or with this make it go wot on startup?