I did a forum search guys and it doesn't come up with anything. Please see signature for truck specifics. When I took my truck for a transmission test run/scan this morning (yes sir, I've got few things to work through on this trans), I recorded;
TCC Mode -
- In park and driving 1st gear - scanner shows TCC MODE "off"
- But, when I hit 2nd gear - it switches to "Apply En"?????? Do we know what "Apply En" means? I cant seem to find this meaning anywhere.
- Lastly, "Apply En" stays there (up through the rest of the gears),... till I hit the required MPH/TPS to lock the TCC - right before the TCC locks, it goes from "Apply En,... to Apply,... then Locked" - please see attached scan around frame 12:00:30,... to see what I mean,....
The only time it switches back to "off" is when I stop at a light (or something). Is all the above right?
TCC Applied -
- As soon as I start moving, and get above ~6mph - my "TCC Applied" switches from 'NO" to "YES",....... is this right? Please see attached scan around frame 11:51:54 as an example,... and throughout scan/it's the same.
- The only time it switches back to "NO" is when I stop at a light (or something).
What does this "TCC Applied" actually represent? When I first saw it, I thought it meant --- The TCC actually applied/ locked up??? But, I'm wrong as usual,... Or, maybe I've done something wrong?
Thanks for the help explaining this to a new guy like me,.... I truly appreciate it fellars,.....