TQ based decel spark limit when car is accelerating

[caniggia]

i have one supercharged car, all runs good except this. This happend after i installed 67mm VMP throttle body.
When car is in part boost at low throttle position, i'm getting spark source torque control and torque source is TQ based decel.
That's totally strange and have no idea now for it. May be that's again speed density as when i have strange spark tq limits it ends in speed density...

tq based decel.png

[reubone]

Having the same issue, did you find a fix?

[caniggia]

All this strange limits were coming from speed density

[mrshanab]

All this strange limits were coming from speed density

I am having the same issue with my 2017 Raptor.
So, have you figured it out?

[caniggia]

Return all speed density to stock and see if issue gone.

[mrshanab]

Return all speed density to stock and see if issue gone.

They have never been touched.

[MPGPerformance]

Having the same issue. Anyone figure this out?

[Thatwhite5.0]

Have any of you tried re-populating torque/inverse tables? Your engine brake torque is much higher than scheduled torque which has your desired load 30% less than what you're creating. Log all your torque channels, torque request, scheduled and so on.

What throttle body data are you using?