-
Potential Tuner
2012 Coyote mustang dyno pulls
I have a 2012 car with a nitrous system i'm tuning, I usually do LS cars or 2013 and up coyote cars with select shift. Any insight if there is a was to hold gears on the dyno with the Coyote cars as you can with the New gm vehicles? Thanks in advance.
-
The scanner does not have an option to lock you in gear for a dyno, you could make a tune and change the downshift RPM and MPH to something that won't let it downshift when you go WOT in 4th, that way you can get the full pull
-
Tuner
Is this what you need ?
trans.PNG
-
Advanced Tuner
Test lock in gear is the only way I've found for it not to down shift everytime you go wot with a 11-12 car. Also set the converter to lock at like 40mph.
-
Potential Tuner
Awesome thanks guys, I'll try for the converter and the lock in gear on some N/A pulls before I spray it. Thank you!