Several customers have contacted us about adding the ability to do calibration only reflashes on the Copperhead to save time.
As of VCM Suite 3.7.110, this is now the default method for flashing. You must first disable the P0605 DTC from the DTC list before using this method of reflashing.
Total time required for a full reflash is 3 minutes, 15 seconds.
Total time required for a calibration only reflash is 53 seconds.
If you are changing strategies, or applying an OS Patch (such as the Copperhead limiter patch), you must do a full reflash. Once the strategy has been changed or the patch applied, you can use calibration only.