Results 1 to 1 of 1

Thread: The data I just read isn't from my vehicle pop up

  1. #1
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247

    The data I just read isn't from my vehicle pop up

    On a growing number of vehicles/controllers we've found they they are unable to be read natively through the obd2 port, however these modules can be flashed without issue. To combat this when the software sees that this is one of those modules it will generate a stock calibration based off the vehicle information it detects. This is nothing to be alarmed about but understand if your vehicle had been previously tuned you WILL lose that tune that was in it as our software can only generate the STOCK calibration. If you are willing to accept that it is the stock calibration simply click ok & tune away

    Pasted image at 2017_07_06 05_12 PM.png
    Last edited by Bill@HPTuners; 07-07-2017 at 10:49 AM.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"