So I put a Katech torquer cam in this 15 corvette and it sometimes misses the cam signal. Seems to come and go and gets worse the warmer the engine gets.
I did a CASE learn and that didn't help. Cut the filter open and its sparkly clean. Put a new cam sensor, harness, and new position actuator and no luck. We just took the front cover back off and don't see anything funny going on.
You can see it in the tach on the dash when this happens fairly easily and it seems like it messes up as the oil pressure is coming back down.
It starts having the problem around when it gets to 189f.
Anyone else have this problem before or is it in the calibration if I can even call it that?
MSD manifold
Catless Kooks
Katech 103mm Throttle body
Afe cai
Katech torque cam and PSI beehives
Thanks