Custom Histogram for LTFT Fuel Mass on Hellcats

[FTSS Mike]

Hey Guys,

I am tuning a hellcat this week. It's fairly stock at the moment other than a set of long tube headers that another shop installed. I purchased the first and second course from the tuning school that is specifically tailored for the hellcat.

Within the lessons they mention creating a custom histogram that uses LTFT and the fuel mass axis to display whether LTFT's are lean or rich. Seems simple enough... However, after inputting the cell data I grabbed from the axis, I am only seeing two cells populated (the lowest and highest values). I've created this histogram 3-4 times now and I am still only seeing the two values. I've seperated the cell data by commas and semicolons, neither makes a difference as to how the data is displayed.

Can someone provide some guidance as to what I am doing wrong?

https://prnt.sc/fyjaa0

https://prnt.sc/fyjbba

[Jay@HAP]

HellcatSTFThisto.jpgHellcatSTFTLTFThisto.jpg

[Jay@HAP]

Try those. Make sure you are logging the Fuel Mass as the same units as it is in the tune, gram or mg, which ever you prefer.

Same for the aircharge for spark, that layout maybe in mg instead of g.

[FTSS Mike]

Thank you so much for the help, I will use them today!