Made some runs last night and first pass was a little rich lambda average was .73 so I leaned it up and I thought it was to much lambda average was.81 so I put some more fuel back in and enriched the meth more , I was around 50/50 went 80/20 but half way through the run I noticed lambda was 1.000 so I let off and checked my logs and noticed it started dropping FP on the 2nd run , mostly in 3rd gear . I run a JMS BAP getting 18v to FPCM , commanding 70 psi averaging around 60 on the first pass and normally does . After some searching I thought it may be fuel pumps or low on fuel I had about 2 bars showing . I find it odd though it starts doing this in 3rd gear , I took 3 screen shots of around the same time all this happens on the 3 runs FP drops very low , any help would be appreciated I have a DSX pump going in next weak and removing the JMS but like to know if I have more issues thx
setup is on a 2012 CTSv pulleys headers 1000ID 5in CAI E85 Meth injection