Results 1 to 8 of 8

Thread: Help. Need baseline tune

  1. #1
    Advanced Tuner jpb1972's Avatar
    Join Date
    Mar 2015
    Location
    New Jersey
    Posts
    271

    Help. Need baseline tune

    Ls3 Camaro. Btr blower cam ported stock heads with Paxton blower pushing about 10 psi. Anyone have a baseline tune that could help me out? Car won't idle worth a s**t.
    Last edited by jpb1972; 08-05-2017 at 07:34 PM.
    .

  2. #2
    Tuner
    Join Date
    Dec 2016
    Location
    Raleigh, NC
    Posts
    127
    Post your tune! You will need to do some research on idle tuning.

    Try adding 200-300 to the target idle speed table.

    The adjust your idle airflow minimum. Try multiplying it by 20% (1.20) If the idle is still rough try 10 or 15% more until you are happy with the idle.

    You will also need to update the startup airflow using the same steps as above.

    Idle spark advance may need to be increased.

  3. #3
    Advanced Tuner jpb1972's Avatar
    Join Date
    Mar 2015
    Location
    New Jersey
    Posts
    271
    Quote Originally Posted by johnny_boii View Post
    Post your tune! You will need to do some research on idle tuning.

    Try adding 200-300 to the target idle speed table.

    The adjust your idle airflow minimum. Try multiplying it by 20% (1.20) If the idle is still rough try 10 or 15% more until you are happy with the idle.

    You will also need to update the startup airflow using the same steps as above.

    Idle spark advance may need to be increased.
    Thanks man. That should help. The tune I'm running on was done with the blower but nothing else. The cam and heads are the new editions. Will try and post tomorrow. Right now I'm relying more on the maf as my VE is rough.
    .

  4. #4
    Advanced Tuner jpb1972's Avatar
    Join Date
    Mar 2015
    Location
    New Jersey
    Posts
    271
    Quote Originally Posted by johnny_boii View Post
    Post your tune! You will need to do some research on idle tuning.

    Try adding 200-300 to the target idle speed table.

    The adjust your idle airflow minimum. Try multiplying it by 20% (1.20) If the idle is still rough try 10 or 15% more until you are happy with the idle.

    You will also need to update the startup airflow using the same steps as above.

    Idle spark advance may need to be increased.
    YOUR THE MAN DUDE! Car fired right up and idled perfect.
    Thanks! This will get me started.
    🍻
    .

  5. #5
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    post your tune and current idle log '




    log after 5/10 mins of idling
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  6. #6
    Tuner
    Join Date
    Dec 2016
    Location
    Raleigh, NC
    Posts
    127
    Glad I could help!

  7. #7
    Advanced Tuner jpb1972's Avatar
    Join Date
    Mar 2015
    Location
    New Jersey
    Posts
    271
    Ok, car fires up but I'm having an issue with it falling on its face after a rev.

    Tried upping timing in base spark and coastdown, not a big change. Multiplied idle air and idle startup, started mult by 10 until car stayed running on its own.

    I'm kind of in the dark because I don't know what kind of increase is typical. I may be flying right over the numbers where I need to be, not sure.

    Here's tune and idle log.
    Attached Files Attached Files
    .

  8. #8
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    check your PM
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161