Results 1 to 11 of 11

Thread: proeblem rtt

  1. #1
    Tuner in Training
    Join Date
    Sep 2015
    Posts
    38

    proeblem rtt

    hi

    after update 3.6 .... the rtt table on the scanner .. not working !!

  2. #2
    Tuner in Training
    Join Date
    Sep 2015
    Posts
    38
    .............

  3. #3
    HP Tuners Owner Keith@HPTuners's Avatar
    Join Date
    Sep 2002
    Location
    Chicago, IL
    Posts
    6,394
    Can you be a bit more descriptive?

    "not working" doesn't really tell us much.
    We got this guy Not Sure, ...

  4. #4
    Tuner in Training
    Join Date
    Sep 2015
    Posts
    38
    Quote Originally Posted by Keith@HPTuners View Post
    Can you be a bit more descriptive?

    "not working" doesn't really tell us much.
    hi Keith

    the problem is :
    after enable rtt via editor ... and I open the scanner and click the tool Icon it doesn't populate the table and says ( vcm scanner has stopped working )

    same problem here :
    https://www.hptuners.com/forum/showt...on-one-lap-top

  5. #5
    HP Tuners Owner Keith@HPTuners's Avatar
    Join Date
    Sep 2002
    Location
    Chicago, IL
    Posts
    6,394
    Hmm.. I haven't heard of that issue with 3.6.

    Please open up a support ticket so we can further assist you.
    We got this guy Not Sure, ...

  6. #6
    Senior Tuner
    Join Date
    Apr 2007
    Posts
    1,104
    the issue stems from clicking the arrow to get the rtt going. it freaks. either shuts down the scanner, or just sits there. If it sits there, i can click the green square and it eventually brings it up to working speed. so slow to respond on any changes being made.
    The most hated, make the most power.
    93 Ranger. 5.3 D1X. 1069hp.

  7. #7

  8. #8
    Advanced Tuner ProTools4's Avatar
    Join Date
    Mar 2006
    Location
    sunny So Cal
    Posts
    292
    My RTT crashes or freezes the Scanner App every time

  9. #9
    Tuner in Training
    Join Date
    Sep 2015
    Posts
    38
    still same problem

  10. #10
    Tuner Trucker82's Avatar
    Join Date
    Aug 2017
    Location
    Bangor, WI
    Posts
    105
    Has anyone figured this problem out? After I initialize the button in the scanner for RTT it box for it open up, the info bar shows it trying to load, then the whole scanner just shuts down.

  11. #11
    Tuner in Training
    Join Date
    Sep 2015
    Posts
    38
    Quote Originally Posted by Trucker82 View Post
    Has anyone figured this problem out? After I initialize the button in the scanner for RTT it box for it open up, the info bar shows it trying to load, then the whole scanner just shuts down.
    same