Hello
5.7 hemi with 1 7/8 kooks, 3" magnaflows and 3000 stall
this car has 274 comp cam in it and it did came from another tuner achieving 340 RWHP i retuned it for couple of hours gaining no more than 350 for some reason.
what numbers you achieve guys on these application ?
Maybe attach the file so we can see if it can be improved
you need to attach a tune and log. what brand of convertor?
depending on if they've got the cams installed properly and phaser kit it should make up to 400whp... 350whp is what a bolt on R/T usually makes...
Bader Norris
MEP Tuned
Telephone: +965-55446651
Email: [email protected]
Attached
the stall is 3000 FTI
Well honestly man just looking at the tune you sent, it looks like you are tuning this cam with ANN. i would switch to SD, that's how i tune for bigger cams.
he should turn off NN and tune , is this correct ?Originally Posted by Duckfan1812
Also looks like PE is pig fat up top ?
looking at how the trans side is adjusted it seems as if you're doing dyno pulls in first gear, there is no way your whp numbers will be accurate in a 3.6 to 1 gear, it will lower power #s significantly.
Also I would change the trans tune A LOT.. as well as raise timing.. it should be pulling around 19 to 21* easily.
guys this thread is 3 years old LOL
Follow @MASTUNING visit www.mastuned.com
Remote Tuning [email protected]
Contact/Whatsapp +966555366161
Reply With Quote