ok I think im finaly learning something.. i looked at the predefined maths that i was using for boost.. and they were using the map-baro to come up with boost which is a No-No from what your saying.. so i made a new math using boost low res - baro... and bam finaly have working boost to make a histogram with and can clean up the charts with just working boost gauge like you were saying....doh !
ok so ive been playing around with the DALs and WG now that i have the 3bar sensors so i can see whats going on. I get a spike when i shift but i still can only make 18ish psi it hits a wall at 5500rpm and flatlines then starts to drop off...heres a Log with my DALs at 255 and wg at 95%
Screenshot (16).png
Screenshot (17).png
rail layout 3.Layout.xml
log 14 255DAL 95%wg.hpl
I know this is a really old thread but it has great info from Cobaltssoverbooster (as always). Mayhem, did you ever figure out what your issue was and why you couldn?t get over 18 psi?