Hi,
we have a C7 A6 with Callaway Supercharger in our shop and the cusromer complains the car running to a Speed Limit at 187mph.
in the scanner i can see Torque Source Trans S limiting but i cant find any table to remove the limiter.
HP Tuners Support was looking to the file and told me its a Tuning issue.
thanks for help.
any ideas?
Speed limiter minimum is where I would start then make sure you have good tires...
2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80
~Greg Huggins~
Remote Tuning Available at gh[email protected]
Mobile Tuning Available for North Georgia and WNC
no difference if i set speed limiter minimum to 249mph.
Got a log?
And after looking at the trans table I will say that I bet it is hitting the rev limiter in 5th gear.
have to send the log monday cause im not on the PC.
i cant find gear rev Limit at the trans. what table ID do you mean?
I think he means your shift points are calibrated incorrectly so its not shifting.Originally Posted by zr1driver
quick and dirty way is to change the conditions to 8k.
The most hated, make the most power.
93 Ranger. 5.3 D1X. 1069hp.
Does not matter..... A6 will not shift to 6th gear under WOT. Only way to go faster is with a taller tire or higher rev limit or change the ring/pinion.
look at your auto shift speed tables. .
The most hated, make the most power.
93 Ranger. 5.3 D1X. 1069hp.
Reply With Quote