Results 1 to 4 of 4

Thread: Tuning a 2015 chrysler 200 s

  1. #1
    Tuner in Training
    Join Date
    Nov 2014
    Location
    roseville, ca
    Posts
    17

    Tuning a 2015 chrysler 200 s

    Ok, I just bought this car and so far I like it quit a bit. It has the 3.6 liter Pentastar, and is AWD. I have been doing A LOT of research on this car, and found someone that is not going to do anything for these cars any more due to lack of interest. I am not looking to making gobs a HP. I am not going to track it, I have an SRT 4 built for road racing, so if I need a fix, I have that. I was just interested in getting just a little more torque out of it, and getting rid of speed gov.

    I did find out that I would have to take my ECU off, so it can get flashed. But this info was from late 2015. Has that changed to where I do not have to send my ECU in to anyone ?

  2. #2
    Tuner in Training
    Join Date
    Jun 2016
    Posts
    49
    As far as I know the 2015+ vehicles would still need there pcm's unlocked. There is a programmer/tuner working on unlocking the pcm so you don't have to deal with this but It's probably going to be a while for us with the Avenger/200 model vehicles.

  3. #3
    Tuner in Training
    Join Date
    Nov 2014
    Location
    roseville, ca
    Posts
    17
    I am going to get a spare ecm, and have it unlocked. Once I get my what I need, I am going to test the waters.

  4. #4
    Tuner in Training
    Join Date
    Jan 2019
    Posts
    28
    Get it Manny !!!