Real Time Tuning

[LosLS2]

Any way to solder on some more ram? Maybe hack up a 99+ PCM, steal the ram and solder it on? I know, I know that I could just switch to a newer PCM, harness and cluster...............man, it makes my knuckles bleed just thinking about this.

[Bill@HPTuners]

probably...but thats alot of work for 1 year pcm...thats why moates didnt even do it.

[Keith@HPTuners]

You could upgrade to a 99 pcm and buy the 98 to 99 adapter harness from Speed INC?

I'm pretty sure they have some harnesses.

[bmfcamaro]

no. they dont have them anymore. they had problems.

[Keith@HPTuners]

Interesting, I wonder what the problems were.

Fuel level gauge wouldn't work.. I think the EVAP system may have a couple of differences as well..

I run a 02 engine harness and PCM in my 97 wired race car chassis (almost identical to 98)..

[bmfcamaro]

i dont know. i read some threads on tech about people calling up speed and they said they dont sale them anymore.

poor 98's why are we cursed with the special pcm.

[Keith@HPTuners]

Well you could try speartech and see if they make some.

[FIL131]

can the 1 Bar Maf enhanced work for Turbo applications with a blow through maf setup with less then 14.7 PSI? Or will I need to get the 1 Bar SD and just use the MAF anyway?

[FIL131]

Also I was making changes in the VE table and the AFR keeps going up or down accordingly and then goes right back where it was before I made the change. What do I need to do to combat this so that I can find the best values in the cells for the AFR I am striving to achieve?

Thanks in advance,

Fil131