cant get RTT working.. help??

[Assassin]

car is a 99 C5 M6, I allready have the 2bar sd enhancement and the new pro cable, I downloaded the update and started over w/taking the stock tune and reapplying the 2bar sd, then copy'd the differences, read entire and write entire, just like first applying 2bar, I cannot access any type of real time tuning like the screenshots show.., am I missing something?, when I did the 2bar enhancement again, there was a new option for "1bar maf" and only that option had RTT next to it, here's a creenshot, and config and bin., please help if you have a chance, thanks...



also I couldnt get the record feature working on the cable but didnt spend a whole lot of time on it....

[Keith@HPTuners]

Help files:
http://www.hptuners.com/help/vcm_edi...ters_gm_os.htm

[Assassin]

so because there is no "RTT" next to my 2bar enhancement, that means I cannot use that feature? (see screenshot I posted)

do you think a future update will allow me to use the RTT without purchasing another enhancement over the 2bar I allready got?

help file dosent make sense, shows a 1bar RTT but my computer dosent show "RTT" next to the 1bar enhancement either...

[Bill@HPTuners]

if it doesnt say RTT next to your custom OS's it just means it isnt available YET, it doesnt mean they dont plan to add it at some point...theres a shitton of OS's they had to completely redue to make this happen in addition to making the all new MAF OS.

[Keith@HPTuners]

More OS's will be support RTT on the next release of VCM Suite.

Difficult to support all of them on initial release. We covered all the major ones on this release.

[Assassin]

oh ok, thanks, makes alot more sense than the help file... guess I need to just wait for all the glitches to be worked out, I can send any files if you guys need corvette stuff....




now on to trying to get the recording cable working.......

[Keith@HPTuners]

no known glitches at this time.

[RoninsDenali]

More OS's will be support RTT on the next release of VCM Suite.

Aww... but i want it now...


Hehe, mine PCM OS isnt supported yet either. But given the fact that this RTT came out of the blue i guess having to tune it the ol' fashioned way isnt gonna kill me...

[Zick]

Is there anything that lists what PCM OS is supported?

[Bill@HPTuners]

almost every 99-02 fbody that I've viewed all are activated...havent looked at truck,c5 or gto files to see what is...your talking dozens of OS's that are activated and dozens more to be activated between now & the next release.

[Assassin]

since this release I've been reading alot of posts, is autotuning going to be available in the next release also(if so dont forget to add us vette OS's), that will be stupid crazy awsome!!

[Bill@HPTuners]

thats what I hear

[ls1rx7]

I have the 1 bar SD enhancement on my 2002 trans am LS1 VCM. I just upgraded to 2.1.12, but I don't see any of the RTT features, and they are not available on the OS edit page of the VCM Editor. If I post my OS code number, can someone tell me if it is supported yet?

Thanks.

[Bill@HPTuners]

post your file & I'll tell you if its supported.

[AtHomeTech]

Talk about getting us all worked up... Maybe a little note in the program where the RTT should be saying your OS isn't supported yet would keep a lot of us from scratching our heads...

[Bill@HPTuners]

kinda like here http://www.hptuners.com/help/vcm_edi...ters_gm_os.htm where it says " If a VCM Enhancement has support for RTT, it will display as follows:" again they will all be supported in time...there are ~100 OS's that have to be completely overhauled for this.

[Keith@HPTuners]

Thats exactly why we put that line in the help files.

[AtHomeTech]

Ya, the help file is a much better place than in the program itself.

[Keith@HPTuners]

You can hit F1 at any time in the software to be brought directly to the proper page in the help file.

[Assassin]

Ya, the help file is a much better place than in the program itself.

tell me about it, I have a question and get a help file... knowing how easy it is to overlook something I spend an hour reading word for word over and over everything in the help file, only to still have the same question.... but now I kind of expect that, have to realize the guys who make the help file know EVERYTHING, so they miss that we know very little compared to them and need that extra clue that it may not work, or work yet, no problem, teaches you to have patience, lol...