Results 1 to 7 of 7

Thread: AEM 30-0310x with HP Tuners Standard 2010 CTS-V

  1. #1
    Potential Tuner
    Join Date
    Jan 2009
    Location
    Michigan
    Posts
    6

    AEM 30-0310x with HP Tuners Standard 2010 CTS-V

    OK trying to get my AEM 30-0310x to work on HP Tuners Standard using CAN data.
    I know the WB is working as the analog output is sent to a Aeroforce gauge.
    I'm using the lastest HPT 3.6.26 after Repoll for supported Parameters is should show up as WB EQ Ratio 1 (According to AEM) and it is not.
    I've double checked my CAN high and Low connection are correct. Any thoughts?

  2. #2
    Advanced Tuner jsllc's Avatar
    Join Date
    Sep 2015
    Location
    Bozeman, MT
    Posts
    701
    This not going to work. AEM has a 30-0333 or 334 that provides a CAN signal that HPT can read directly. Otherwise you will need custom code on them. I have two in my ZL1. Dr. Mike and this thread. https://www.hptuners.com/forum/showt...d-beta-testers

  3. #3
    Potential Tuner
    Join Date
    Jan 2009
    Location
    Michigan
    Posts
    6
    Thanks for the info! I ordered and installed the wrong model. AEM 30-0333 on order now.

  4. #4
    Advanced Tuner jsllc's Avatar
    Join Date
    Sep 2015
    Location
    Bozeman, MT
    Posts
    701
    The 30-0333 is the older version. My understanding it is getting replaced by 30-0334. I will tell you the custom code on the 30-0310 works very well. Have it running now for a over a year.

  5. #5
    Potential Tuner
    Join Date
    Jan 2009
    Location
    Michigan
    Posts
    6
    Quote Originally Posted by jsllc View Post
    The 30-0333 is the older version. My understanding it is getting replaced by 30-0334. I will tell you the custom code on the 30-0310 works very well. Have it running now for a over a year.
    Ordered 30-0334. Where do you get the custom code for the 0310?

  6. #6
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Posts
    599
    AEM hasn't decided to add the OBDII code to the 30-0310 because it lacks any sort of user interface to set up. So, the settings have to be hard-coded in the firmware.

    I have done a few re-flashes of the firmware for some customers with fixed-settings firmware. But, if you don't know which settings ( on a 30-0333/334 ) work for you, it's a crap shoot.

  7. #7
    Potential Tuner
    Join Date
    Jan 2009
    Location
    Michigan
    Posts
    6
    Thanks for the added information dr.mike