Siemens FI11351
Siemens FI11354
SMP FJ601
GM 19146088
Chrysler 4891574AB (04891574AD)
Chrysler 68051554AA
AC Delco 217-2939
All of these injectors cross reference to the ones we are using. The Siemens FI11354 or SRT4 injectors. Looking for the "Inj.PW vs. Fuel Mass and Fuel Mass vs. Inj.PW" tables for SRT 392 Scat. Any help would be greatly appreciated. I have one reference that I found on here but need (at the least) one more if not two to call it gospel. Thanks,
He is the rest of the data if it helps or if you have a "Greg" spreadsheet and are willing to crunch me one?
Specifications:
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Gain: 0.75
Spray Pattern: Cone
Electrical Connector: USCAR (New-style V=EV6 / Oval / LS2)
Fitted with Viton upper and lower o-rings.
Static Flow Rate @ 43.5PSI (300kPa): 46.5 lb/hr = 5.86g/s = 478cc/min (+/-3%)
Static Flow Rate @ 58.0PSI (400kPa): 53.7 lb/hr = 6.77g/s = 552cc/min (+/-3%)
Dynamic Flow Rate 2.5ms PW @ 100Hz (400kPa): 11.42mg/pulse +/-4%
Applications:
Dodge / Chrysler SRT
Direct fit for LS2 and LS7 Applications!
Made for high pressure, harsh environment turbo & supercharged applications
Cross Reference:
Siemens FI11351
Siemens FI11354
SMP FJ601
GM 19146088
Chrysler 4891574AB (04891574AD)
Chrysler 68051554AA
AC Delco 217-2939
Part Number:
FI11351 FI11354
If you're looking for injector data for a Neon SRT-4, that's easy enough. But by the description of those injectors, they don't seem to match up exactly to what the Neon SRT-4 injectors are. They appear as though they could substitute as a viable cheap replacement, but +/- 3% is quite the tolerance, and leads me to believe they may be "2nd tier" products that didn't meet the specs for OEM supply. With a spread like that, you could be running 11.8:1 AFR in one hole, and as high as 12.5:1 in another.
The SRT-4 injectors were rated at 577cc/min for the 2004+ and all Mopar S1 setups. The 2003 injectors were a little smaller, rated at 527cc/min.
In any event, if you want to take the chance that the data for the 577cc/min injectors is close enough for your application, here's the data straight from a 2004 SRT-4 calibration file:
ms---------fuel mass (grams)
0-----------0
0.584------0.002125
0.88--------0.005671875
1.28--------0.0088125
1.696-------0.012484375
2.744-------0.019609375
14.352------0.099875
18.536------0.129453125
22.104------0.1485
25-----------0.17053125
31-----------0.21009375
I say thank you boostjunky! I will smash those number into the tune and SEND IT! (edit, I will make a spreadsheet to calculate all injectors and share with everyone, why didn't I think of that two days ago?)
Last edited by AWEBB; 10-20-2017 at 07:07 PM. Reason: myo spreadsheet and share with everyone
Current project:
Reply With Quote