Results 1 to 4 of 4

Thread: Basic programming for a Standalone LB7 build

  1. #1
    Tuner in Training
    Join Date
    Sep 2015
    Posts
    25

    Basic programming for a Standalone LB7 build

    Hey guys. I'm putting a '69 Chevy truck over a 2002 4x4 chassis and LB7 drivetrain. Sent the harness off to Ken Wolkens to get standalone. Besides Vats and basic egr stuff, what other things do I need to change in the computer to make it run right before firing? Thanks in advance!

    Aaron

  2. #2
    Tuner in Training
    Join Date
    Sep 2015
    Posts
    25
    Nobody?

  3. #3
    Tuner in Training
    Join Date
    Sep 2015
    Posts
    25
    What a kick-ass, awesome, super-active forum! Where else can you go for so much knowledge and help?

  4. #4
    Trying to bring this back from the dead. I too have a Duramax swap build in the works, I have a completed harness. Id like to work on the basics myself. How and what exactly should or needs to be done to Delete the VAPS and checked so I can fire this bad boy up? Motor is a 2006 LBZ stock, With 6 speed Allison. Going in a 1973 4wd Crew Cab Chevy. any help is much appreciated.