I swapped a 2012 6.0 into a 2007 Jeep JK Wrangler about 1 1/2 years ago and have been "messing" with the tune. Adjusted the Maf and have been trying to do the vve and struggling.
As stated it is a 2012 6.0/6L80e using a 2010 E38 ecm with the 6.2 tune. Jeep drives fine, shifts fine just wanted to clean things up. But I am wondering about the 6.0 using the 6.2 tune.
Can that be dialed in or would it be best to do some swapping of tunes from a 6.0 and work with that. As of now this is just kind of a generic question to see which direction to go. Keep tuning or start over with some things.
Like I stated, only thing I have messed with is maf, vve and a little with when pe comes in.
Still really learning, got motowns introduction (waiting for his updates to drop for Gen IV) and doing a lot of other reading and some trial and error.
Thanks for any guidance.