Today on the way home I got an engine light no big deal right? I was logging so I checked the dtc and it wouldn't all fit on one screen!!!
Here's what came up:
U1000 - Class 2 Communication Malfunction (History) (Immature)
C0226 - LF Wheel Speed Signal Missing (History)
P0156 - HO2S Circuit Bank 2 Sensor 2 (SES) (Pending) (Old) (History) (Current) (Immature)
C0222 - RF Wheel Speed Signal Missing (History)
B2575 - Unknown (History) (Immature)
B2961 - Unknown (History) (Immature)
B0083 - Unknown (History) (Immature)
U1000 - Class 2 Communication Malfunction (History) (Immature)
P0300 - Engine Misfire Detected (Pending) (Immature)
U1016 - Loss of Class 2 Communication with VCM (History) (Immature)
B0092 - PPS passenger detection error (History) (Immature)
U1000 - Class 2 Communication Malfunction (History) (Immature)
U1000 - Class 2 Communication Malfunction (History) (Immature)
Kicker is if I try and clear the codes it won't. None of them not even the engine code's. I'm using the latest download.
This morning I loaded a Maf tune instead of the SD tune I have been running but I don't think it has anything to do with that.
Some strange things have happened this week, first passenger jumps out of the truck closed the door and I get "Buckle passenger" ah yeah there's nobody in the seat? Then a day later leave work travel 100' and truck shuts off not stalls just shuts off... "Reduced engine power" and won't restart. I reload my last tune and it fires up and runs fine.
What the hell is going on? I did cut a piece off the trailer hitch with the plasma cutter on Sunday could I have let the infamous smoke out of the VCM?
I think it would have should up sooner.