-
Tuner in Training
AEM 30-0300 MPVI connections for 1999 LS1
Posting here to see if I get more replies...
Do I connect the serial wire to pin 1 and a ground to pin 5 or 6..... Or do I connect Analog + to pin 1 and Analog - to pin 5 or 6?
I have read where some people use the serial wire, but the MPVI wiring diagram seems to suggest using the Analog + and - wires. Is one more accurate than the other?
I will have more questions once I get all of the hardware connected correctly.
-
Tuner in Training
Found the answer on here from Dr. Mike. The Analog + and - are the most accurate.