RPM ranges in tables

[dhoagland]

Newbie here

Why are RPM ranges different in tables that seem to depend on each other
Petal map has a Max rpm of 3800 (though all 3800 rpm values are zero)
Desired fuel pressure table has a Max rpm of 3300, what happens when you are at 3600 rpm?
SOI table has a max rpm of 3500

Shouldn't these all be the same?

The petal table has 21 columns, the pressure & SOI only have 19.
I'm guessing so long as the Min & Max values are the same thats okay everthing will fall in ranges?

The adder & multiplier tables are all over the place on Max RPM
I'm guessing they are only needed in the RPM rangers they have?

Thanks

[Bamofo]

So the way the maps work is if you hit the top of the RPM value as stated in your example, the truck explodes. kidding...

If you are revving higher then the map it just stays with the value at the top of the table. Depending on if your actually needing things to change that high up you can change the values. For instance in Fuel pressure its always going to be the same pressure regardless if its 3000 or 3500 when i step on it. "unless your trying to ramp down fuel or ramp up fuel"

Simple answer, it uses the top value and if you dont need it to change above that... just leave it be and worry about the rest of the rom and how much of a mess it is

[dhoagland]

Thank You