Results 1 to 6 of 6

Thread: ESP and BAS Systems

  1. #1
    Advanced Tuner
    Join Date
    Aug 2016
    Location
    Thunderdome
    Posts
    390

    ESP and BAS Systems

    Is it possible to have HPT remove or set the triggers to a different value? It takes note of the steering angle using other sensors to determine if something is not "straight". Can HPT influence this any?
    I have a burrito in my colon, yet refried beans come out...
    How i know it's from the same meal? I didn't ingest corn any other time.

  2. #2
    Anybody have any idea's?

  3. #3
    Disabling the ESP on my vehicle was easy....
    Engine
    General Tab
    Size
    Engine Size: (whatever liter your engine is)
    Displacement: 0.0L

    So for my vehicle:
    Engine Size: 3.6L
    Displacement: 0.0L
    This disables the ESP on my vehicle totally Vs using the traction control button which disables it partially
    To reEnable it I would need to change the 0.0L back to the 3.6L for my engine and refresh the pcm

  4. #4
    Tuner in Training
    Join Date
    Dec 2019
    Posts
    28
    Do you get errors on dash with this method?

  5. #5
    Tuner N2speed's Avatar
    Join Date
    Mar 2021
    Location
    Pompano Beach FL
    Posts
    74
    yes


    www.n2speed.com

    Sales@n2speed.com

    Dodge And GM Tuning Suppport
    Diablosport CMR | HP Tuners

  6. #6
    Advanced Tuner
    Join Date
    May 2018
    Location
    Germany
    Posts
    364
    is it possible to esp a little lower with displacement setting higher ?

    If yes, this would help by supercharging….