Limp mode

[reubone]

Caliber SRT4 change max map to 300 from 217 get limp mode

[reubone]

Also running into a 500nm tq limiter

[Jay@HAP]

There have been several threads recently about this issue on other Mopars. If you raise it about a certian kpa it goes limp. The last thread I read about was a Challenger. I think it should be on the first 3 pages somewhere of the Dodge section.

[reubone]

ok cool ill look at that. the other tune files i have seen have this moved to 300 kpa. this one seems different some how. ill take a look tho thank you

[bosstin87]

if it is a 217 kpa cap then the ecm was previously a ms1k/ms2k tune. I had the same issue and after a very long conversation with the creator you basically need to get a stock ecm that has not been flashed to either of the versions of tune. factory tune is 300kpa

[reubone]

Anyway to write entire a stock tune file and make it work or we have to get a stock ecm? thanx for the knowledge